Tube Fittings Manufacturer, Supplier, Exporter In Oman

Leading Tube Fittings Manufacturer, Supplier & Exporter in Oman

Tube fittings used in Oman often operate in systems where even small leaks or alignment issues can cause downtime. Mcneil Alloys works with these realities in mind, supplying tube fittings as a manufacturer, distributor, and wholesaler for projects that require control, consistency, and long service life rather than just catalogue products.

Our tube fittings are produced for applications where secure grip, repeatable assembly, and pressure stability matter. The supply range includes compression fittings, flare fittings, push-type connectors, and application-specific tube connectors used in instrumentation lines, process tubing, HVAC systems, and fluid handling networks. Material selection and dimensional control are handled carefully to ensure fittings install correctly and remain stable over time.

We manufacture and supply tube fittings in stainless steel, brass, and selected high-performance alloys based on operating pressure, temperature, and corrosion exposure. By combining manufacturing capability with local distribution and wholesale supply, Mcneil supports both planned project volumes and routine replacement needs across Oman and the wider Gulf region.

Types

• Available in four major types
• Union: Male / Female Connectors
• Elbows: Reducing Connectors
• Tees: Combination End Connection
• Cross: Bulk Head Union

Technical Specification

• Body: Stainless Steel, Carbon Steel, Brass, Monel, Hastelloy etc.
• Tube O.D size: 116″ (2mm) to 1″ (25mm)
• Test Pressure: 6000 PSI (431BAR)
• Temperature: -150 Degree Centigrade to 400 Degree Centigrade depending on the M.O.C
• End Connection: Screwed Male / Female, Tube Ends

Features

• No Over tightening
• Provision of assembling with self aligning front and back ferrules
• Support among all components and full face contacts
• Vibration controlled due to full support.
• Reduction of tubing I.D. minimum
• No torque transmitted to tubing
• No twisting of the tube when fitting
• Re-usable, can be assembled and taken apart several times.
• With stands vaccum as well as on high and low pressure.
• Low torque for assembly.

Material of Construction

• Stainless Steel : ASTM / ASME SA 312 GR, TP 304, 304L, 304H, 3095, 309H, 310S, 310H,316, 316TI, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L,ASTM / ASME SA 358 CL 1 % CL 3 GR. 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 321, 321H, 47.
• Duplex Steel : ASTM / ASME SA 790 UNS NO
• Carbon Steel : ASTM ASME A 53 GR. A & B, ASTM A 106 GR. A.B & C. API5L GR.B, M.S. & G.I ERW pipes
  API5L X 42, X46, X52, X60,X65 & X 70, ASTM / ASME A 691 GR A,B & C
• Alloy Steel : ASTM /ASME A 335 GR P1, P5, P9, P11, P12, P22, P23, P91, ASTM/ ASME A 691 GR 1 CR, 11/4 CR, 21/ 4CR.
• Nickel Alloy : ASTM/ASME SB 163 UNS 2200 (NICKEL200) ASTM/ASME SB 163 UNS 2201 (NICKEL 201) ASTM/ASME SB 163 165 UNS 4400 (MONEL 400)
  ASTM/ASME SB 464 U NS 8020 (ALLOY 20/ 20 CB 3)
  ASTM /ASME SB 704/705 UNS 8825 INCONEL(825)A
  ASTM /ASME SB 167/ 517 UNS 6600 (INCONEL 600)
  ASTM ASME SB 167 UNS 6601 (INCONEL 601)
  ASTM /ASME SB 704/ 705 UNS 6625 (INCONEL 625)
  ASTM /ASME SB 619/622/626 UNS 10276 (HASTELLOY C276)
• Copper Alloy : ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300. 10800, 12000, 12200, 70600, 71500.
  ASTM / ASME SB 466 UNS NO. C 70600 (CU-NI-90/10), C 71500 CU-NI-70/30) BR & NON-IBR

Different Types Of Instrumentation Tube Fittings