When we supply tube fittings for projects in Kuwait, we focus on how you actually use them in the field. These fittings are not just components on a drawing they are part of systems that handle pressure, heat, and continuous operation. We design our tube fittings to hold their seal even when conditions change, so you don’t have to worry about performance after installation.

You may be installing them in instrumentation lines, process systems, or control panels where reliability matters every day. That’s where we see our fittings perform best. They are built to grip the tube securely, reduce the chance of leakage, and remain stable even when vibration or thermal movement is present. They can be assembled, dismantled, and reused without losing sealing capability, which helps you save time during maintenance and shutdowns.

Across Kuwait’s oil & gas facilities, refineries, and industrial plants, they are used in environments that demand consistency rather than shortcuts. We manufacture our tube fittings to work smoothly with seamless as well as welded and redrawn tubing, including fully annealed tubes. If you need additional assurance for project approval, we can provide material traceability and inspection documentation on request.

Types

• Available in four major types
• Union: Male / Female Connectors
• Elbows: Reducing Connectors
• Tees: Combination End Connection
• Cross: Bulk Head Union

Technical Specification

• Body: Stainless Steel, Carbon Steel, Brass, Monel, Hastelloy etc.
• Tube O.D size: 116″ (2mm) to 1″ (25mm)
• Test Pressure: 6000 PSI (431BAR)
• Temperature: -150 Degree Centigrade to 400 Degree Centigrade depending on the M.O.C
• End Connection: Screwed Male / Female, Tube Ends

Features

• No Over tightening
• Provision of assembling with self aligning front and back ferrules
• Support among all components and full face contacts
• Vibration controlled due to full support.
• Reduction of tubing I.D. minimum
• No torque transmitted to tubing
• No twisting of the tube when fitting
• Re-usable, can be assembled and taken apart several times.
• With stands vaccum as well as on high and low pressure.
• Low torque for assembly.

Material of Construction

• Stainless Steel : ASTM / ASME SA 312 GR, TP 304, 304L, 304H, 3095, 309H, 310S, 310H,316, 316TI, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L,ASTM / ASME SA 358 CL 1 % CL 3 GR. 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 321, 321H, 47.
• Duplex Steel : ASTM / ASME SA 790 UNS NO
• Carbon Steel : ASTM ASME A 53 GR. A & B, ASTM A 106 GR. A.B & C. API5L GR.B, M.S. & G.I ERW pipes
  API5L X 42, X46, X52, X60,X65 & X 70, ASTM / ASME A 691 GR A,B & C
• Alloy Steel : ASTM /ASME A 335 GR P1, P5, P9, P11, P12, P22, P23, P91, ASTM/ ASME A 691 GR 1 CR, 11/4 CR, 21/ 4CR.
• Nickel Alloy : ASTM/ASME SB 163 UNS 2200 (NICKEL200) ASTM/ASME SB 163 UNS 2201 (NICKEL 201) ASTM/ASME SB 163 165 UNS 4400 (MONEL 400)
  ASTM/ASME SB 464 U NS 8020 (ALLOY 20/ 20 CB 3)
  ASTM /ASME SB 704/705 UNS 8825 INCONEL(825)A
  ASTM /ASME SB 167/ 517 UNS 6600 (INCONEL 600)
  ASTM ASME SB 167 UNS 6601 (INCONEL 601)
  ASTM /ASME SB 704/ 705 UNS 6625 (INCONEL 625)
  ASTM /ASME SB 619/622/626 UNS 10276 (HASTELLOY C276)
• Copper Alloy : ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300. 10800, 12000, 12200, 70600, 71500.
  ASTM / ASME SB 466 UNS NO. C 70600 (CU-NI-90/10), C 71500 CU-NI-70/30) BR & NON-IBR

Different Types Of Instrumentation Tube Fittings