Types

• 1 Piece, 2 Piece & 3 Piece. In –Line & Lift type.

Material of Construction

• Body: Stainless Steel, CS A105, Brass, Monel, Hastelloy.
• Poppet/Ball: SS 316, SS 304, Monel.
• Seal: VITON, P.T.F.E.
• Orifice Dia: 1/8” (3mm) to 1 ¾ ”(45mm)
• Size Range: 1/8” To 2”
• End Connection: Screwed NPT/BSP Ends, Twin Ferrule Tube Fitting Ends, Socketweld , Buttweld & Flange Ends.
• Test Pressure: 25°C Room Temperature
• Hydrostatic: Body – 620 Bar, Seat – 413 Bar
• Pneumatic: Seat – 60 Bar
• Cracking Pressure: Standard – 7 psi (0.5 Bar)
• Finish: CS Zinc Plated, SS –Natural.

Feature

• Lapped seat provides leak tight shut-off.
• Internal design guides flow around or inside spring & not through coils, when valve is open
• Effective leak-tight closure with minimum flow resistance.
• Valves are available with various cracking pressure, from 1/3 to 25 psi.
• 2 piece body permits interchangeability of end connection.
• Each valve is 100 % tested at required pressure, to ensure leak tightness at Seat and Shell.